Anti-Microbial Activities of Mussel-Derived Recombinant Proteins against Gram-Negative Bacteria.

Many anti-microbial peptides (AMPs) and pro-apoptotic peptides are considered as novel anti-microbial agents, distinguished by their different characteristics. Nevertheless, AMPs exhibit certain limitations, including poor stability and potential toxicity, which hinder their suitability for applications in pharmaceutics and medical devices. In this study, we used recombinant mussel adhesive protein (MAP) as a robust scaffold to overcome these limitations associated with AMPs. Mussel adhesive protein fused with functional peptides (MAP-FPs) was used to evaluate anti-microbial activities, minimal inhibitory concentration (MIC), and time-kill kinetics (TKK) assays against six of bacteria strains. MAP and MAP-FPs were proved to have an anti-microbial effect with MIC of 4 or 8 µM against only Gram-negative bacteria strains. All tested MAP-FPs killed four different Gram-negative bacteria strains within 180 min. Especially, MAP-FP-2 and -5 killed three Gram-negative bacteria strain, including E. coli, S. typhimurium, and K. pneumoniae, within 10 min. A cytotoxicity study using Vero and HEK293T cells indicated the safety of MAP and MAP-FP-2 and -3. Thermal stability of MAP-FP-2 was also validated by HPLC analysis at an accelerated condition for 4 weeks. This study identified that MAP-FPs have novel anti-microbial activity, inhibiting the growth and rapidly killing Gram-negative bacteria strains with high thermal stability and safety.

Self-Powering Sensory Device with Multi-Spectrum Image Realization for Smart Indoor Environments.

The development of organic-based optoelectronic technologies for the indoor Internet of Things market, which relies on ambient energy sources, has increased, with organic photovoltaics (OPVs) and photodetectors (OPDs) considered promising candidates for sustainable indoor electronic devices. However, the manufacturing processes of standalone OPVs and OPDs can be complex and costly, resulting in high production costs and limited scalability, thus limiting their use in a wide range of indoor applications. This study uses a multi-component photoactive structure to develop a self-powering dual-functional sensory device with effective energy harvesting and sensing capabilities. The optimized device demonstrates improved free-charge generation yield by quantifying charge carrier dynamics, with a high output power density of over 81 and 76 µW cm-2 for rigid and flexible OPVs under indoor conditions (LED 1000 lx (5200 K)). Furthermore, a single-pixel image sensor is demonstrated as a feasible prototype for practical indoor operating in commercial settings by leveraging the excellent OPD performance with a linear dynamic range of over 130 dB in photovoltaic mode (no external bias). This apparatus with high-performance OPV-OPD characteristics provides a roadmap for further exploration of the potential, which can lead to synergistic effects for practical multifunctional applications in the real world by their mutual relevance.

Monolithic 3D integration of 2D materials-based electronics towards ultimate edge computing solutions.

Three-dimensional (3D) hetero-integration technology is poised to revolutionize the field of electronics by stacking functional layers vertically, thereby creating novel 3D circuity architectures with high integration density and unparalleled multifunctionality. However, the conventional 3D integration technique involves complex wafer processing and intricate interlayer wiring. Here we demonstrate monolithic 3D integration of two-dimensional, material-based artificial intelligence (AI)-processing hardware with ultimate integrability and multifunctionality. A total of six layers of transistor and memristor arrays were vertically integrated into a 3D nanosystem to perform AI tasks, by peeling and stacking of AI processing layers made from bottom-up synthesized two-dimensional materials. This fully monolithic-3D-integrated AI system substantially reduces processing time, voltage drops, latency and footprint due to its densely packed AI processing layers with dense interlayer connectivity. The successful demonstration of this monolithic-3D-integrated AI system will not only provide a material-level solution for hetero-integration of electronics, but also pave the way for unprecedented multifunctional computing hardware with ultimate parallelism.

Fibriform Organic Electrochemical Diodes with Rectifying, Complementary Logic and Transient Voltage Suppression Functions for Wearable E-Textile Embedded Circuits.

In this study, a fibriform electrochemical diode capable of performing rectifying, complementary logic and device protection functions for future e-textile circuit systems is fabricated. The diode was fabricated using a simple twisted assembly of metal/polymer semiconductor/ion gel coaxial microfibers and conducting microfiber electrodes. The fibriform diode exhibited a prominent asymmetrical current flow with a rectification ratio of over 102, and its performance was retained after repeated bending deformations and washings. Fundamental studies on the electrochemical interactions of polymer semiconductors with ions reveal that the Faradaic current generated in polymer semiconductors by electrochemical reactions results in an abrupt current increase under a forward bias, in which the threshold voltages of the device are determined by the oxidation or reduction potential of the polymer semiconductor. Textile-embedded full-wave rectifiers and logic gate circuits were implemented by simply integrating the fibriform diodes, exhibiting AC-to-DC signal conversion and logic operation functions, respectively. It was also confirmed that the proposed fibriform diode can suppress transient voltages and thus protect a low-voltage operational wearable e-textile circuit.

Investigation of the factors responsible for the low oral bioavailability of alizarin using a sensitive LC-MS/MS method: In vitro, in situ, and in vivo evaluations.

Alizarin (1,2-dihydroxyanthraquinone) is an anthraquinone reddish dye widely used for painting and textile dyeing. As the biological activity of alizarin has recently attracted increasing attention from researchers, its therapeutic potential as complementary and alternative medicine is of interest. However, no systematic research has been conducted on the biopharmaceutical and pharmacokinetic aspects of alizarin. Therefore, this study aimed to comprehensively investigate the oral absorption and intestinal/hepatic metabolism of alizarin using a simple and sensitive tandem mass spectrometry method developed and validated in-house. The present method for the bioanalysis of alizarin has merits, including a simple pretreatment procedure, small sample volume, and adequate sensitivity. Alizarin exhibited pH-dependent moderate lipophilicity and low solubility with limited intestinal luminal stability. Based on the in vivo pharmacokinetic data, the hepatic extraction ratio of alizarin was estimated to be 0.165-0.264, classified as a low level of hepatic extraction. In an in situ loop study, considerable fractions (28.2%-56.4%) of the alizarin dose were significantly absorbed in gut segments from the duodenum to ileum, suggesting that alizarin may be classified as the Biopharmaceutical Classification System class II. An in vitro metabolism study using rat and human hepatic S9 fractions revealed that glucuronidation and sulfation, but not NADPH-mediated phase I reactions and methylation, are significantly involved in the hepatic metabolism of alizarin. Taken together, it can be estimated that the fractions of oral alizarin dose unabsorbed from the gut lumen and eliminated by the gut and liver before reaching the systemic circulation are 43.6%-76.7%, 0.474%-36.3%, and 3.77%-5.31% of the dose, respectively, resulting in a low oral bioavailability of 16.8%. Therefore, the oral bioavailability of alizarin depends primarily on its chemical degradation in the gut lumen and secondarily on first-pass metabolism.

Three-dimensional imaging performance of photoelectrochemical cells.

A photoelectrochemical (PEC) cell produces hydrogen energy using solar energy and an electrochemical reaction. In the hydrogen production process with water decomposition, electrons move from the anode to the cathode, and by measuring the current value at this time, the PEC cell can generate hydrogen and function as an image sensor at the same time. Due to the characteristics of the PEC cell that can perform both functions simultaneously, it can be applied as a device that can detect and respond to the surrounding environment without the need for an observation system such as a camera. We present the imaging performance of PEC cells. The effectiveness of the experiment was confirmed by applying the PEC cells to integral imaging, one of the three-dimensional (3D) imaging techniques.

Validity of Luminex and Enzyme-Linked Immunosorbent Assay Measuring Vascular Endothelial Growth Factor and Six Cytokines Quantitatively in Bone Marrow Aspiration Supernatant: Pilot Study.

OBJECTIVE: Vascular endothelial growth factor (VEGF) and other cytokines have been reported to be implicated in the molecular pathogenesis of hematologic malignancy. However, a quantitative measurement of VEGF and related cytokines is necessary to reflect the real situation in the bone marrow (BM). Currently, no such quantitative assays exist for use in the BM supernatant as their concentrations have not been previously validated in the BM. Here we performed linearity and recovery tests to quantitatively measure the concentrations of VEGF and six related cytokines in the BM. METHOD: A total of 24 BM supernatant samples were collected from patients who underwent a BM examination for hematological malignancies. The levels of VEGF and six cytokines - granulocyte colony-stimulating factor (G-CSF), interferon-ß (INF-ß), interleukin (IL)-1ß, IL-6, IL-17A, and tumor necrosis factor-α (TNF-α) - were measured using Luminex assay and enzyme-linked immunosorbent assay. Percentage recovery and linearity were calculated, with the acceptable range being 80-120%. The undiluted and diluted (1:2, 1:4, and 1:8) concentrations of VEGF and the six cytokines in 24 spiked and unspiked BM supernatant samples and controls were also measured. RESULTS: For VEGF, both assays passed the percentage recovery and linearity tests; wherein the undiluted and all diluted concentrations of VEGF in all six unspiked BM samples showed linearity parallel to those of VEGF in spiked BM samples and controls. For the other six cytokines, both assays did not pass the percentage recovery and linearity tests, with the undiluted and diluted concentrations in all seventeen unspiked BM samples (except G-CSF in one sample) showing a lack of parallelism to those in spiked BM samples and controls. CONCLUSIONS: Quantitative VEGF measurement in real BM specimens was validated using both Luminex assay and ELISA. All six cytokines, except for VEGF, whether undiluted or diluted, could not be accurately measured in the BM supernatants, indicating the presence of inhibitors to the analytes. Quantitative measurement of VEGF-related cytokines in the BM will have to be validated in further studies with more samples.

Chip-less wireless electronic skins by remote epitaxial freestanding compound semiconductors.

Recent advances in flexible and stretchable electronics have led to a surge of electronic skin (e-skin)-based health monitoring platforms. Conventional wireless e-skins rely on rigid integrated circuit chips that compromise the overall flexibility and consume considerable power. Chip-less wireless e-skins based on inductor-capacitor resonators are limited to mechanical sensors with low sensitivities. We report a chip-less wireless e-skin based on surface acoustic wave sensors made of freestanding ultrathin single-crystalline piezoelectric gallium nitride membranes. Surface acoustic wave-based e-skin offers highly sensitive, low-power, and long-term sensing of strain, ultraviolet light, and ion concentrations in sweat. We demonstrate weeklong monitoring of pulse. These results present routes to inexpensive and versatile low-power, high-sensitivity platforms for wireless health monitoring devices.

Two distinct receptor-binding domains of human glycyl-tRNA synthetase 1 displayed on extracellular vesicles activate M1 polarization and phagocytic bridging of macrophages to cancer cells.

Macrophages play important roles in cancer microenvironment. Human cytosolic glycyl-tRNA synthetase (GARS1) was previously shown to be secreted via extracellular vesicles (EVs) from macrophages to trigger cancer cell death. However, the effects of GARS1-containing EVs (GARS1-EVs) on macrophages as well as on cancer cells and the working mechanisms of GARS1 in cancer microenvironment are not yet understood. Here we show that GARS1-EVs induce M1 polarization and facilitate phagocytosis of macrophages. GARS1-EVs triggers M1 polarization of macrophage via the specific interaction of the extracellular cadherin subdomains 1-4 of the cadherin EGF LAG seven-pass G-type receptor 2 (CELSR2) with the N-terminal WHEP domain containing peptide region of GARS1, and activates the RAF-MEK-ERK pathway for M1 type cytokine production and phagocytosis. Besides, GARS1 interacted with cadherin 6 (CDH6) of cancer cells via its C-terminal tRNA-binding domain to induce cancer cell death. In vivo model, GARS1-EVs showed potent suppressive activity against tumor initiation via M1 type macrophages. GARS1 displayed on macrophage-secreted extracellular vesicles suppressed tumor growth in dual mode, namely through pro-apoptotic effect on cancer cells and M1 polarization effect on macrophages. Collectively, these results elucidate the unique tumor suppressive activity and mechanism of GARS1-EVs by activating M1 macrophage via CELSR2 as well as by direct killing of cancer cells via CDH6.

Integral imaging using a MoS2 Schottky diode.

We report the performance of a MoS2 Schottky diode on three-dimensional (3D) integral imaging. The MoS2 Schottky diode has asymmetric Pt electrodes for the Schottky contact and Ti/Au electrodes for the ohmic contact. Such a Schottky diode exhibits an excellent rectification ratio of 103, a broad spectral photoresponse in the 450-700 nm range, an almost ideal linearity of 1, and a wide linear dynamic range of 106 dB. We successfully conduct object pickup experiments using integral imaging and validate the feasibility of a single-pixel imager as a 3D image sensor.

Near-Infrared Self-Powered Linearly Polarized Photodetection and Digital Incoherent Holography Using WSe2/ReSe2 van der Waals Heterostructure.

Polarization-sensitive photodetection has attracted considerable attention as an emerging technology for future optoelectronic applications such as three-dimensional (3D) imaging, quantum optics, and encryption. However, traditional photodetectors based on Si or III-V InGaAs semiconductors cannot directly detect polarized light without additional optical components. Herein, we demonstrate a self-powered linear-polarization-sensitive near-infrared (NIR) photodetector using a two-dimensional WSe2/ReSe2 van der Waals heterostructure. The WSe2/ReSe2 heterojunction photodiode with semivertical geometry exhibits excellent performance: an ideality factor of 1.67, a broad spectral photoresponse of 405-980 nm with a significant photovoltaic effect, outstanding linearity with a linear dynamic range wider than 100 dB, and rapid photoswitching behavior with a cutoff frequency up to 100 kHz. Strongly polarized excitonic transitions around the band edge in ReSe2 lead to significant 980 nm NIR linear-polarization-dependent photocurrent. This linear polarization sensitivity remains stable even after exposure to air for longer than five months. Furthermore, by leveraging the NIR (980 nm)-selective linear polarization detection of this photodiode under photovoltaic operation, we demonstrate digital incoherent holographic 3D imaging.

Diffusion-Based Separation of Extracellular Vesicles by Nanoporous Membrane Chip.

Extracellular vesicles (EVs) have emerged as novel biomarkers and therapeutic material. However, the small size (~200 nm) of EVs makes efficient separation challenging. Here, a physical/chemical stress-free separation of EVs based on diffusion through a nanoporous membrane chip is presented. A polycarbonate membrane with 200 nm pores, positioned between two chambers, functions as the size-selective filter. Using the chip, EVs from cell culture media and human serum were separated. The separated EVs were analyzed by nanoparticle tracking analysis (NTA), scanning electron microscopy, and immunoblotting. The experimental results proved the selective separation of EVs in cell culture media and human serum. Moreover, the diffusion-based separation showed a high yield of EVs in human serum compared to ultracentrifuge-based separation. The EV recovery rate analyzed from NTA data was 42% for cell culture media samples. We expect the developed method to be a potential tool for EV separation for diagnosis and therapy because it does not require complicated processes such as immune, chemical reaction, and external force and is scalable by increasing the nanoporous membrane size.

Analysis of the Relationship between the Expression Levels of Neutrophil Gelatinase-Associated Lipocalin and Cytokine Genes in Bone Marrow.

Background: Recently, various associations of NGAL with several hematological cancers have been reported. However, given that the regulation of NGAL gene expression by cytokines is tissue-specific, NGAL expression in relation to those of cytokine genes has not been analyzed in bone marrow (BM) tissue. The purpose of this study was to analyze the association between NGAL and 48 cytokine gene expression levels in mononuclear cells (MNCs) of BM at the time of diagnosis of hematological malignancy and to explore the expression pattern of NGAL and related cytokine genes in patients with hematological malignancies and controls. Methods: BM MNCs were isolated from 48 patients, who were classified as patients presenting myeloproliferative neoplasm, acute myeloid leukemia, myelodysplastic syndrome, and as controls. NGAL and cytokine genes were analyzed using NanoString. Data on hematological parameters were collected from medical records. Single and multiple regression analyses were performed to analyze relationships. Results: Normalized counts of 26 cytokine genes were related to NGAL normalized counts, while STAT3 and TLR4 normalized counts had the highest explanatory power. The following multiple regression model was developed: NGAL normalized counts=4316.825 + 9.056 × STAT3 normalized counts + 844.226 × IL5 normalized counts + 17.540 × TLR1 normalized counts - 28.206 × TLR2 normalized counts - 42.524 × IRAK4 normalized counts. In the multiple regression analysis, STAT3 and TLR4 normalized counts showed multicollinearity. NGAL, STAT3, IL5, and TLR4 normalized counts showed similar intergroup patterns. Conclusions: NGAL normalized counts was predicted by a multiple regression model, while they showed similar intergroup patterns to STAT3, IL5, and TLR4 normalized counts.

Long-term reliable physical health monitoring by sweat pore-inspired perforated electronic skins.

Electronic skins (e-skins)-electronic sensors mechanically compliant to human skin-have long been developed as an ideal electronic platform for noninvasive human health monitoring. For reliable physical health monitoring, the interface between the e-skin and human skin must be conformal and intact consistently. However, conventional e-skins cannot perfectly permeate sweat in normal day-to-day activities, resulting in degradation of the intimate interface over time and impeding stable physical sensing. Here, we present a sweat pore-inspired perforated e-skin that can effectively suppress sweat accumulation and allow inorganic sensors to obtain physical health information without malfunctioning. The auxetic dumbbell through-hole patterns in perforated e-skins lead to synergistic effects on physical properties including mechanical reliability, conformability, areal mass density, and adhesion to the skin. The perforated e-skin allows one to laminate onto the skin with consistent homeostasis, enabling multiple inorganic sensors on the skin to reliably monitor the wearer's health over a period of weeks.

S100A8/A9 mediate the reprograming of normal mammary epithelial cells induced by dynamic cell-cell interactions with adjacent breast cancer cells.

To understand the potential effects of cancer cells on surrounding normal mammary epithelial cells, we performed direct co-culture of non-tumorigenic mammary epithelial MCF10A cells and various breast cancer cells. Firstly, we observed dynamic cell-cell interactions between the MCF10A cells and breast cancer cells including lamellipodia or nanotube-like contacts and transfer of extracellular vesicles. Co-cultured MCF10A cells exhibited features of epithelial-mesenchymal transition, and showed increased capacity of cell proliferation, migration, colony formation, and 3-dimensional sphere formation. Direct co-culture showed most distinct phenotype changes in MCF10A cells followed by conditioned media treatment and indirect co-culture. Transcriptome analysis and phosphor-protein array suggested that several cancer-related pathways are significantly dysregulated in MCF10A cells after the direct co-culture with breast cancer cells. S100A8 and S100A9 showed distinct up-regulation in the co-cultured MCF10A cells and their microenvironmental upregulation was also observed in the orthotropic xenograft of syngeneic mouse mammary tumors. When S100A8/A9 overexpression was induced in MCF10A cells, the cells showed phenotypic features of directly co-cultured MCF10A cells in terms of in vitro cell behaviors and signaling activities suggesting a S100A8/A9-mediated transition program in non-tumorigenic epithelial cells. This study suggests the possibility of dynamic cell-cell interactions between non-tumorigenic mammary epithelial cells and breast cancer cells that could lead to a substantial transition in molecular and functional characteristics of mammary epithelial cells.

High-performance coaxial piezoelectric energy generator (C-PEG) yarn of Cu/PVDF-TrFE/PDMS/Nylon/Ag.

Coaxial type piezoelectric energy generator (C-PEG) nanofiber was fabricated by a self-designed continuous electrospinning deposition system. Piezoelectric PVDF-TrFE nanofiber as an electroactive material was electrospun at a discharge voltage of 9-12 kV onto a simultaneously rotating and transverse moving Cu metal wire at an angular velocity of ω g = 60-120 RPM. The piezoelectric coefficient d33 of the PVDF-TrFE nanofiber was approximately -20 pm V-1. The generated output voltage (V G) increased according to the relationship exp(-α P) (α = 0.41- 0.57) as the pressure (P) increased from 30 to 500 kpa. The V G values for ten and twenty pieces of C-PEG were V G = 3.9 V and 9.5 V at P = 100 kpa, respectively, relatively high output voltages compared to previously reported values. The high V G for the C-PEG stems from the fact that it can generate a fairly high V G due to the increased number of voltage collection points compared to a conventional two-dimensional (2-dim) capacitor type of piezoelectric film or fiber device. C-PEG yarn was also fabricated via the dip-coating of a PDMS polymer solution, followed by winding with Ag-coated nylon fiber as an outer electrode. The current and power density of ten pieces of C-PEG yarn were correspondingly 22 nA cm-2 and 8.6 µW cm-3 at V G = 1.97 V, higher than previously reported values of 5.54 and 6 µW cm-3. The C-PEG yarn, which can generate high voltage compared to the conventional film/nanofiber mat type, is expected to be very useful as a wearable energy generator system.

Spirally Wrapped Carbon Nanotube Microelectrodes for Fiber Optoelectronic Devices beyond Geometrical Limitations toward Smart Wearable E-Textile Applications.

Fiber optoelectronics technology has recently attracted attention as enabling various form factors of wearable electronics, and the issue of how to control and optimize the configuration and physical properties of the electrode micropatterns in the microfiber devices has become important. Here, spirally wrapped carbon nanotube (CNT) microelectrodes with a controlled dimension are demonstrated for high-performance fiber optoelectronic devices. Inkjet-printed CNT microelectrodes with the desired dimension on an agarose hydrogel template are rolling-transferred onto a microfiber surface with an efficient electrical interface. A fiber organic field-effect transistor with spirally wrapped CNT microelectrodes verifies the feasibility of this strategy, where the transferred microelectrodes intimately contact the organic semiconductor active layer and the output current characteristics are simply controlled, resulting in characteristics that exceed the previous structural limitations. Furthermore, a fiber organic photodiode with spirally wrapped CNT microelectrodes, when used as a transparent electrode, exhibits a high Ilight/Idark ratio and good durability of bending. This fiber photodiode can be successfully incorporated into a textile photoplethysmography bandage for the real-time monitoring of human vital signals. This work offers a promising and efficient strategy to overcome the geometric factors limiting the performance of fiber-optic optoelectronic devices.

All 2D WSe2/MoS2 heterojunction photodiode and its image sensor application.

Two-dimensional (2D) layered van der Waals atomic crystals exhibit many fascinating properties. In particular, their dangling-bond-free nature enables different 2D materials to be stacked on the top of each other without restraint, thereby forming a heterostructure. In this study, a high-performance all 2D WSe2/MoS2 heterojunction photodiode with a graphene contact as an electrode is demonstrated. It exhibits an excellent electrical performance (ideality factor of 1.2 and rectification ratio of 104), a broad spectral photoresponse (from 450 to 980 nm), and a remarkable linearity with a linear dynamic range of 113 dB. Finally, a self-powered single pixel imager is demonstrated as a feasible optoelectronic application.

Plasma Lysyl-tRNA Synthetase 1 (KARS1) as a Novel Diagnostic and Monitoring Biomarker for Colorectal Cancer.

Colorectal cancer (CRC) is one of the leading causes of world cancer deaths. To improve the survival rate of CRC, diagnosis and post-operative monitoring is necessary. Currently, biomarkers are used for CRC diagnosis and prognosis. However, these biomarkers have limitations of specificity and sensitivity. Levels of plasma lysyl-tRNA synthetase (KARS1), which was reported to be secreted from colon cancer cells by stimuli, along with other secreted aminoacyl-tRNA synthetases (ARSs), were analyzed in CRC and compared with the currently used biomarkers. The KARS1 levels of CRC patients (n = 164) plasma were shown to be higher than those of healthy volunteers (n = 32). The diagnostic values of plasma KARS1 were also evaluated by receiving operating characteristic (ROC) curve. Compared with other biomarkers and ARSs, KARS1 showed the best diagnostic value for CRC. The cancer specificity and burden correlation of plasma KARS1 level were validated using azoxymethane (AOM)/dextran sodium sulfate (DSS) model, and paired pre- and post-surgery CRC patient plasma. In the AOM/DSS model, the plasma level of KARS1 showed high correlation with number of polyps, but not for inflammation. Using paired pre- and post-surgery CRC plasma samples (n = 60), the plasma level of KARS1 was significantly decreased in post-surgery samples. Based on these evidence, KARS1, a surrogate biomarker reflecting CRC burden, can be used as a novel diagnostic and post-operative monitoring biomarker for CRC.

Self-Powered Visible-Invisible Multiband Detection and Imaging Achieved Using High-Performance 2D MoTe2/MoS2 Semivertical Heterojunction Photodiodes.

Two-dimensional (2D) van der Waals (vdW) heterostructures herald new opportunities for conducting fundamental studies of new physical/chemical phenomena and developing diverse nanodevice applications. In particular, vdW heterojunction p-n diodes exhibit great potential as high-performance photodetectors, which play a key role in many optoelectronic applications. Here, we report on 2D MoTe2/MoS2 multilayer semivertical vdW heterojunction p-n diodes and their optoelectronic application in self-powered visible-invisible multiband detection and imaging. Our MoTe2/MoS2 p-n diode exhibits an excellent electrical performance with an ideality factor of less than 1.5 and a high rectification (ON/OFF) ratio of more than 104. In addition, the photodiode exhibits broad spectral photodetection capability over the range from violet (405 nm) to near-infrared (1310 nm) wavelengths and a remarkable linear dynamic range of 130 dB within an optical power density range of 10-5 to 1 W/cm2 in the photovoltaic mode. Together with these favorable static photoresponses and electrical behaviors, very fast photo- and electrical switching behaviors are clearly observed with negligible changes at modulation frequencies greater than 100 kHz. In particular, inspired by the photoswitching results for periodic red (638 nm) and near-infrared (1310 nm) illumination at 100 kHz, we successfully demonstrate a prototype self-powered visible-invisible multiband image sensor based on the MoTe2/MoS2 p-n photodiode as a pixel. Our findings can pave the way for more advanced developments in optoelectronic systems based on 2D vdW heterostructures.